GBP (£)
The world's first 4K HDMI modulator with 9V IR!
TM-RF HD IR 4K
The TM-RF HD IR 4K can accept an HDMI signal up to
4K60 4:4:4 HDR, HDMI 2.0 with HDCP 2.2 and it will pass this same 4K signal on
the HDMI loopout so that you have the original 4K video/audio signal on the
HDMI output (for example, when connecting to a 4K TV).
The modulator will then downscale the 4K resolution to
1080p only on the RF output for your coaxial cable system*.
With current 1080p HDMI modulators, if you are using a
source device that supports 4K (such as SkyQ, CCTV DVR/NVR, etc), the modulator
cannot support a 4K HDMI input, therefore you have to reduce your source
device's HDMI resolution to 1080p or you have to buy a separate down-scaler
device. The all-in-one TM-RF HD IR 4K will accept a 4K HDMI input and has a
down-scaler built-in.
In an example install scenario, you may have a mixture
of 4K and 1080p TVs. For your 4K TV, you want to watch in 4K so you can connect
the HDMI loopout of the modulator to this TV and the other TVs you can use the
RF output of the modulator and connect this to an aerial amplifier (sold
separately) so that you can watch the 1080p RF on multiple TVs
- 4K:60 4:4:4 HDR 10bit HDMI 2.0 HDCP 2.2 Input
- HDMI Loop-through passes the same signal
- DVB-T RF converts the 4K signal to 1080p on the RF Output
- 9V Infra-Red including IR Eye
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
