GBP (£)
1U Mic/Line Rack Mixer
953.024UK ML432
Rack-mountable 1U mixer with 4 mic inputs and 3 auxiliary inputs. Mic channel 1 has 20V phantom power and adjustable voice-over muting of auxiliary channels. An additional priority input can be connected to a line level input or an external 100V line PA system for emergency paging. Output connections are stereo jack with master bass and treble tone controls. Designed as a master or extension mixer for installed sound systems.
- 4 balanced microphone inputs
- +20V phantom power on priority mic input
- 3 stereo aux line inputs
- Can tap from an existing 100V PA system
- 24Vdc power option
| Frequency response : line | 120Hz - 26kHz | Input sensitivity : aux | -12dBV |
|---|---|---|---|
| Input sensitivity : line | -19dBV | Rear panel controls | Aux muting level, priority input level |
| Inputs : priority | Line level (6.3mm jack), 100V (terminals) | Inputs : mic | 4 x balanced 6.3mm jack (+XLR for mic1) |
| THD | 0.05% | Signal to noise ratio : aux/line | 58dB |
| Signal to noise ratio : mic | 54dB | Input sensitivity : mic | -50dBV |
| Frequency response : aux | 50Hz - 35kHz | Weight | 1.43kg |
| Frequency response : mic | 130Hz - 21kHz | Input impedance | 2.2k Ohms (mic/line), 10k Ohms (aux) |
| Controls | 4 x Mic level, 3 x Aux level, Treble, Bass, L+R output | Outputs | Left + Right 6.3mm jack (unbalanced) |
| Inputs : aux | 3 x L+R RCA | Phantom power | +20Vdc (mic1 XLR input only) |
| Fuse | T1AL 250V (mains) or F500mA (24Vdc) | Power supply | 100-240Vac, 50/60Hz (IEC) or 24Vdc (terminals) |
| Dimensions | 482 x 130 x 44mm |
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
