GBP (£)
AirSense Addressable Panel Interface Card (APIC) - Apollo protocol
9-30430
Features
- Simple addressing onto the addressable loop
- Ribbon cable connection – no hard wiring
- Piggy backs onto detector main board
- Ease of address setting
Overview
The 9-30430 is an interface which can be attached directly onto the main control board of any of the AirSense aspirating detectors. The card plugs into the main control board inside the detector enclosure. The board enables the detector to be directly addressed and communicate with the main fire control panel via the Apollo protocol.
Plug in terminals
Detectors are wired onto the loop using plug in terminals located on the detector main control board. The detector and interface are easily addressed by switch settings prominently positioned on the card.
Single address and multi address modes
The Apollo APIC has two distinct modes of operation; single address and multi address. When the interface is set to single address mode the card appears at a single address on the Apollo loop and the detector status is read from that address. Multi address mode is used when monitoring the status of multiple detectors with consecutive addresses from a single Apollo card. Multi address mode is normally only used in the Command Module.
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
